Tesnit BA-50

GASkET mATERIAL wITh Good mEChANICAL ANd ChEmICAL PRoPERTIES TESNIT® BA-50 is a special gasket material based on aramide fibres and NBR rubber. Gasket material TESNIT® BA-50 has an excellent chemical resistance and good dynamical resistance. Material has a wide

general application. It is used in gas, food and chemical industry

dImENSIoNS oF STANdARd ShEET

Sheet size (mm): 1000 x 1500 | 1500 x 1500 | 3000 x 1500 | 4500 x 1500

Thickness (mm): 0.5   |   0.8   |  1.0   |   1.5   |   2.0   |   3.0

Other dimensions and thicknesses on request

دانلود کاتالوگ

توضیحات محصول

GASkET mATERIAL wITh Good mEChANICAL ANd ChEmICAL PRoPERTIES TESNIT® BA-50 is a special gasket material based on aramide fibres and NBR rubber. Gasket material TESNIT® BA-50 has an excellent chemical resistance and good dynamical resistance. Material has a wide

general application. It is used in gas, food and chemical industry.

PRoPERTIES ANd APPLICATIoN

Gasket material with good resistance to water, gases, fuels and oils at lower loadings.

   
Approvals applied for DVGW 3535/6, DVGW KTW, DVGW W270, CRS, Germanischer Lloyd, TA LUFT (VDI 2440) , TARC/MRPRA, WRAS/WQc
   

 

Basis                                                         Aramide fibres, NBR

SURFACE TREATmENT Treatment with graphite, PTFE and antistick coating is available

on request.

dImENSIoNS oF STANdARd ShEET

Sheet size (mm): 1000 x 1500 | 1500 x 1500 | 3000 x 1500 | 4500 x 1500

Thickness (mm): 0.5   |   0.8   |  1.0   |   1.5   |   2.0   |   3.0

Other dimensions and thicknesses on request.

TEChNICAL dATA Typical values for a thickness of 2 mm

Compressibility ASTM F36/J                               %                                                 8
Recovery ASTM F36/J                               %                                                 45
Tensile strength DIN 52910                                 MPa                                         9
Stress resistance DIN 52913
16h, 300°C, 50MPa MPa                                         20
16h, 175°C, 50MPa MPa                                         25
Specific Leak Rate DIN 3535/6                                   mg/(s.m)                                 0.08
Thickness increase ASTM F 146
Oil IRM 903, 5h, 150°C %                                                 10
ASTM Fuel B, 5h, 23°C %                                                 10
Max. operating conditions  
Peak temperature °C/°F                                         280/536
Continuous temperature °C/°F                                         220/428
– with steam °C/°F                                         180/256
Pressure bar/psi                                     80/1160

اطلاعات بیشتر

سایز

5*1500*1500, 4*1500*1500, 3*1500*1500, 2*1500*1500, 1.5*1500*1500, 1*1500*1500, 0.5*1500*1500

2 نقد و بررسی Tesnit BA-50

  1. 4 از 5

    :

  2. 2 از 5

    :

دیدگاه خود را بنویسید